产品信息

特点：

安全无毒，不氧化，不腐蚀，可直接接触皮肤；快速有效去除核酸污染。

Features:

Safe, non - toxic, non - oxidation, non - corrosion, direct contact with the skin; Rapid and effective removal of nucleic acid contamination.

使用方法：

(1)各种台面和仪器表面的清洁：将本产品直接喷于台面和仪器表面，用普通吸水纸擦净，晾干。

(2)移液枪的清洁：根据移液枪说明书拆卸移液枪，将易污染核酸的部分浸放在本产品中5-10分钟，再用蒸馏水彻底浸泡冲洗后，晾干，装回移液枪。

(3)玻璃和塑料器皿的清洁：将器皿浸泡在本产品中，5-10分钟后取出，再用蒸馏水彻底浸泡冲洗干净后，晾干备用。

(4)气溶胶的清洁：当实验室有轻度的气溶胶污染，可用本产品对实验室进行全面喷洒，待 1-2 小时后，并配合 1:50稀释的 84 消毒液进行地面及台面的擦拭可有效清除气溶胶污染；当实验室气溶胶污染严重时，建议处理 2-3 次，处理完成后可检测处理效果。

Usage:

1)  Clean all kinds of table and instrument surface: Spray the product directly on the table and instrument surface, wipe it with ordinary absorbent paper, and dry it.

2)  Cleaning of pipette: Disassemble the pipette according to the pipette instruction, soak the part of nucleic acid that is liable to contaminate in the product for 5-10 minutes, then thoroughly soak and rinse with distilled water, dry it, and put it back  into the pipette.

3)  Cleaning of glass and plastic containers: Soak the containers in this product, take them out after 5-10minutes, thoroughly soak and rinse them with distilled water, and then dry them for later use.

4)  Aerosol cleaning: When there is mild aerosol pollution in the laboratory, this product can be used to spray the laboratory comprehensively, after 1-2 hours, and with 1:50 diluted 84 disinfectant to wipe the floor and table surface can effectively remove aerosol pollution;When the laboratory aerosol pollution is serious, 2-3 times of treatment is recommended, and the treatment effect can be detected after the treatment is completed.

保存：室温保存

Storage: Store at room temperature

相关产品：